Overview:

MirroDroid is a simple mirroring application that allows you to easily mirror your Android device to a Windows PC. It is an installable application that works flawlessly and enables you to share your Android device using either a USB connection or Wi-Fi on the same network. Simply install the setup file, open the application, and start mirroring your Android device.

Key Features:

🖥️ Easily mirrors your Android device to your PC using ADB
🌐 Works with both USB and wireless connections via Wi-Fi IP
🔆 Choose whether you want the screen to be turned on or off while mirroring
🔗 Mirror multiple devices using USB only

1. Extract the .rar file

First, extract the MirroDroid.rar file to any location on your PC. You will find one setup file inside it.

2. Install MirroDroid

To install MirroDroid, simply double-click the setup file. This will install MirroDroid on your PC. If you see a “Windows protected your PC” alert, click on More info and then select Run anyway.

3. Developer Mode

Before running the application, you must enable Developer Mode. Turn on USB Debugging (for using a USB connection) and Wireless Debugging (for using a Wi-Fi connection). This does not require rooting your Android device.

To enable Developer Mode:
- Go to Settings > About Phone > Software Information.
- Tap Build Number multiple times until you see a message that says Developer mode has been enabled.
- Go back to Settings and open the newly visible Developer Options.
- Turn on both USB Debugging and Wireless Debugging.

4. Running the Application

After the setup is complete, simply double-click the MirroDroid app from the desktop, or search for it in the Start Menu. Allow access to ADB, then choose whether you want to use a USB connection or Wi-Fi. Click Yes to use USB, or click No to use a wireless (Wi-Fi) connection.

5. Mirror Screen Using USB (Screen On/Off or Multiple Devices)

To mirror your screen using USB, ensure USB Debugging is enabled (as described in Step 3), and connect your Android device or multiple devices to your PC via a USB cable. Then, open the MirroDroid app and choose "YES" when prompted to use USB.

You can then choose whether to screen mirror with the Android device's screen turned on or off (devices are listed by serial number). However, if the device is inactive and a lock period is set, the mirrored screen will turn black. Make sure the device is active and/or the lock is disabled on your phone.

Please note: If multiple devices are connected, it will prompt for Screen Options for each device. Your Android screen will then automatically be mirrored to your PC.

6. Mirror Screen Using Wi-Fi (IP)

Mirroring your Android Device using Wi-Fi takes a few more steps.

On Android Device: - Go to the Developer Options Developer Options > Wireless Debugging > Tap on Wireless Debugging > Pair device with pairing code > Open Pair device with pairing code.
You will see "Pair With Device"
Wifi-pariing Code: XXXXXX
IP address and Port: 192.168.X.X:xxxx

ON Your PC:

- Open the MirroDroid app and choose "NO" to use Wi-Fi. Input the exact information i.e. your IP, Port and the Pairing code. Then again input the IP and Port it should mirror your Android device wirelessly.You can screen mirror with the screen turned on or off.

7. Is pairing necessary everytime?

Pairing doesn't need to be done every time. Once paired, it should work wirelessly. You will only need to input the IP & Port (it might change with WiFi). To find the IP and Port, go to Settings > Developer Options > Wireless Debugging. Tap on Wireless Debugging, and you will then find the IP address and port: 192.168.X.X:xxxx.

In the MirrorDroid app, first choose "NO" to use Wi-Fi, then choose "YES" for "Is your Android device already paired?" and input the IP and Port.

8. Error connecting Wirelessly

If you cannot connect your Android device wirelessly then please restart or Sigout your PC (pressing Alt + F4) and as well turn on and off the Wireless Debugging on your Android Device. PLEASE WAIT FOR A FEW SECONDS. YOUR PORT MAY CHANGE.

If you see your PC under Paired Device You do not need to Pair your Android to PC again. Simply Open the MirrorDroid App, choose NO to use WIfi. Say yes to "Is your Android Device Already Paired." And then Input your Android's IP address. If this doesnt work you might have to pair your Android to PC again.